Follow us on Social Media


  • The more sun, the more it waters – waters every 3 hrs
  • Saves plants from drought and waters when on holiday
  • Automatic watering for up to 120 Irrigation Units
    (e.g. 50 large hanging baskets or 120 x 20 litre pots)
  • Drip waters up to 5m above the water source
  • Uses up to 90% less water than a hose
  • Easy, Eco, Efficient
  • Water source to solar pump – maximum 20m
  • Water source to last dripper – maximum 60m
  • Also connects to a tap – use the Irrigatia Reservoir Kit
Irrigatia SOL-C120 watering capacity table

Irrigatia SOL-C120 solar automatic watering & irrigation system

More Information

The new tank series requires a rainwater tank (rather than waterbutt) since they water many more plants and therefore require at least 1,000 litre tank.

There are 3 models:-

C60 - waters up to 60 IU's (Irrigation Units)
C120 - waters up to 120 IU's
C180 - waters up to 180 IU's

C120 controller
Irrigatia SOL-C120 solar panel
SOL-C120 Kit Contents

C120 controller with main pump and secondary feed pump, water level sensor, C120 Solar Panel with 5m lead, 1 x inline filter + 2 x 13mm adaptors,  1 x foot strainer,  1 x 25m roll of 13mm tube, 1 x 2.5m 3.5mm tube and inlet filter,1 x 4mm punch, 12 x 4mm joiners, 2 x 13mm t piece, 4 x 13mm end plug, 4 x 13mm elbow, 10 x 13mm stakes, 6 x 13mm clamps, 2 x 13mm Valves, 12 x 4mm valves, battery pack containing 20 x AA rechargeable batteries

 Min no. of IU's  60
 Max no. of IU's  120
 Microporous   ✔
 Dripper   ✔
 Height (m)
 To controller (m)
 To last dripper (m)


To assist in selecting the most
appropriate Irrigatia controller, we’ve
devised a simple method to demonstrate
each product’s capacity. We call them
‘Irrigation Units’, or ‘IU’ for short.

Irrigatia ECO friendly irrigation

The SOL-C120 connects to the following Irrigatia Kits:

Drippers: Use for pots, baskets and individual plants.
Seephose: Ideal for short runs in a mixed dripper / seephose environment, germinating seedlings, watering plant troughs and small beds.
Microporous Hose: Ideal for flower beds, raised beds, vegetable plots, fruit trees and fruit cages.

Keep your garden happy and hydrated: 6 ways to make your garden more drought resistant

by Norwoods Gardener | Apr 20, 2021

There are so many ways for gardeners to be more efficient and conserve water in their outdoor spaces, whilst still keeping their plants happy and thriving, and creating a drought resistant garden is a brilliant way to do so – it sets you up for success from the outset! Here are a few of our simple tips and tricks to transform your garden into a drought-resistant paradise.

1. Choose drought-resistant plants

Our first simple and easy step towards making your garden drought-resistant is to carefully choose which plants you have in your garden. Drought resistant plants won’t just save you time and energy when it comes to caring for them – but they will save your water too. A few of our favourite drought resistant plants include lavender, jasmine and geraniums.


2. Stay on top of weed growth

Remember, weeds don’t just make your borders look messy and unkept – they’re detrimental for your plants when it comes to water consumption too. It doesn’t matter how often you water your plants, with the presence of weeds there will always be a constant battle between them for both water and nutrients. By staying on top of weed growth and removing them as often as possible, you’ll be able to make sure your plants aren’t competing with those pesky weeds once again!


3. Prioritise watering ALL new plants

Keeping your plants watered thoroughly in the first season of growth is vital to make sure they establish well. Once established, if watered correctly at the planting stage, you’ll notice they become far more drought tolerant.

The same applies when planting trees, shrubs and climbers too! Ideally you should aim to do this around autumn or early winter as they’ll establish quicker, meaning less watering will be required during the upcoming summer when there may be less rain.

4. Install water butts immediately!

Many gardeners panic at the slight mention of a hosepipe ban, however, your garden never has to suffer from dehydration again with the help of a water butt. Ditch the outdated and inefficient hosepipe in your garden and replace it with a water butt, to save lots of water, time, and energy when it comes to watering.

The process is both simple and sustainable. Rather than using mains water, water butts store rainwater which can then be recycled. By connecting an Irrigatia kit, you can ensure your garden is automatically watered every three hours, keeping your plants thriving, happy and hydrated all year round. You’ll never have to endure the effects of another hosepipe ban again!


5. The more mulching the better!

Mulching is absolutely essential for the conservation of water in your garden. The technique is simple and an incredibly great way to retain water in your soil through:

  • Reducing weed growth
  • Slowing down the movement of rain from borders during heavy spells
  • Building soil structure – encouraging the retention of moisture for longer

Organic mulch is the best for this and can be made using decomposed plant matter, grass clippings, leaf mould, bark, or straw. You can ensure your plants remain hydrated at all times just by taking the time to stay on top of mulching.

6. Get yourself an Irrigatia kit!

And last, but certainly not least, why not get your very own Irrigatia kit? Once installed, you won’t have to worry about your garden lacking in moisture every again – Irrigatia will do the hard work for you. Using recycled rainwater stored in water butts, our Irrigatia kits will respond to the weather to give your plants the perfect amount of water.


If you want to keep up with the latest growing journeys and other gardening related things happening in the Irrigatia team’s garden, head over to our social channels - where you can hear more of our gardening tips and tricks.